Our company is a factory specializing in the production of PEEK profiles, focusing on PEEK rod,PEEK bars,PEEK tube,PEEK pipe,PEEK sheet,PEEK plates PEEK film etc..
Glass Fiber Filled PEEK Rod Descrition:
PEEK is a linear aromatic polymer compound. The main chain of the macromolecule contains large aromatic ring and polar ketone group, which gives the polymer heat resistance and mechanical strength. In addition, the macromolecules contain large ether bonds, which give the polymer toughness. It is a thermoplastic with high temperature resistance, high glass transition temperature (143°C) and melting point (334°C), load thermal variation temperature up to 316°C, can be used at 260°C for a long time.
PEEK GF30 Rod (Brown gray): This material is filled with 30% glass fiber reinforced plastic, which has better rigidity and creep resistance than PEEK-1000, also has higher thermal stability, and better dimensional stability, which is ideal for the manufacture of structural parts. It can withstand fixed load for a long time under high temperature and high pressure. If PEEK GF30 is used as a slide, it should be carefully tested for suitability, because the glass fiber will scratch the mating surface.
Glass Fiber Filled PEEK Rod Specification:
|
Product name |
Glass Fiber Filled PEEK Rod |
|
Material |
PEEK GF30 |
|
Size |
Diameter:3-300mm,Length:1000mm or 300mm |
|
Custom Size |
More than Dia300mm needs to be customized |
|
Custom Size |
Diameter less than 3MM can also be customized |
|
Processing Type |
Extruded |
|
Tolerance |
Depends on the sizes |
|
Sample |
Free |
|
MOQ |
1 PC |
|
Delivery Time |
3-5 days |
Glass Fiber Filled PEEK Rod basic characteristics:
1,Good mechanical properties
2,self-lubricating
3,Corrosion resistance
4,self-extinguishing properties
5,peel resistance
6,fatigue resistance
7,radiation resistance
8,hydrolysis resistance
9,high temperature resistance
Glass Fiber Filled PEEK Rod Application:
1.Semiconductor machinery components.
2.Aerospace parts.
3.Sealing parts.
4.Pump and valve components.
5.Bearings/bushings/gears.
6.Electrical components.
7.Medical instrument parts.
8.Food processing machinery components.
9.Oil industry
1.Stock Glass Fiber Filled PEEK Rod available sizes:
Diameter: 3mm,peek , 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 150mm, 200mm,250mm, 300mm.
length:1000mm or 3000mm.
2. All Glass Fiber Filled PEEK Rod can be cut to any size.
3. Glass Fiber Filled PEEK Rod with a diameter greater than 300MM needs to be customized; and those with a diameter less than 3MM can also be customized if the accuracy requirements are not too high. Of course, these two kinds of products are more expensive.
