Products
Home > Products > 5-axis CNC machining

5-axis CNC machining Manufacturers

Our corporation has been specializing in brand strategy. Customers' gratification is our greatest advertising. We also source OEM company for 5-axis CNC machining,CNC lathe machined parts,,CNC drilled fittings,CNC drilling parts,CNC lathe machining parts, As we're moving forward, we continue to keep an eye on our ever-expanding merchandise range and make improvement to our services.
5-axis CNC machining, High output volume, top quality, timely delivery and your satisfaction are guaranteed. We welcome all inquiries and comments. If you are interested in any of our items or have an OEM order to fulfill, remember to feel free to contact us now. Working with us will save you money and time.

Related Products

Hot Products

  • CPVC Rod and CPVC Bar

    CPVC Rod and CPVC Bar

    CPVC rod and CPVC bar is made from PVC chlorinated by chlorine gas in solvent surrounding . It can offer good electrical insulation, thermoplasticity and membrane forming capacity, chemical stability, resist corrosion and water, dissolved in acetone, hydrochloric ether, arene, ester and some alcohol.
  • PTFE teflon seal tape

    PTFE teflon seal tape

    PTFE teflon seal tape is also named Teflon, PTFE teflon seal tape divided into PTFE,PFA,FEP,PCTFE,ETFE, it has an extremely long service life, even at extreme temperatures, in ultraviolet (UV) light, and when exposed to oils, oxidizing agents and solvents. PTFE also is extremely corrosion resistant, especially to acids, and harsh inorganic and organic chemicals. Additionally, the original properties PTFE remain the same even after extended time periods in water. Furthermore, PTFE is resistant to atmospheric aging in the form of discoloration, oxidation, and as previously noted, is not affected by ultraviolet light.Welcome to buy PTFE teflon seal tape from us.
  • Victrex black PEEK sheet and rod

    Victrex black PEEK sheet and rod

    Victrex black PEEK sheet and rod is a super heat-resistant aromatic crystalline thermoplastics. Victrex black PEEK sheet and rod can be used at very high tmperatures(about+260°C) and Victrex black PEEK sheet and rod shows an extraordinary mechanical strength,thoughness,hardness,flexural strength, PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260°C and a very good resistance to all kinds of radiation(even ultraviolet rays only lead to a slight yellow discolouration of its self-extinguishing properties according to UL 94.Welcome to buy Victrex black PEEK sheet and rod from us.
  • Torlon nuts

    Torlon nuts

    Torlon PAI plastic is a modified polyimide and is a kind high temperature resistant engineering plastic.Torlon bearing cage,Torlon clip nuts /Torlon nuts is used as petrochemical industry with good performance.
  • PEEK Valve Disc

    PEEK Valve Disc

    PEEK valve disc is a super heat-resistant aromatic crystalline thermoplastics Polyetheretherketone are in the harsh environment in accordance with the requirements of the development of the use of high-performance, and practical applications of a wide range of plastic Softening point of 334 C, the glass transition temperature of 143 C.
  • PEEK washers

    PEEK washers

  • Related Blog
  • Reviews

  • What are the precautions for producing machined parts

    For many large-scale equipment, machined parts are indispensable during production and assembly, and the quality of machined parts also determines whether the performance of the entire equipment can be fully released. At the same time, good machined parts can also extend the equipment. service life. There are also many factories on the market that produce machined parts. When producing machined parts, you should pay attention to the following matters in order to make better products.

  • Application of Ultrasonic Welding in the Design of Industrial Injection Products

    As we all know, in the design of industrial injection molding products, the use of ultrasound is one of the highlights of product design and assembly. Many product designs need to use assembly buckles, but because the buckle assembly sometimes has problems with tightness, resulting in products Will not perform well enough in terms of waterproofing!

  • Peek material processing technology?

    PEEK material is a high-temperature, high-performance thermoplastic special engineering plastic with good mechanical properties, chemical resistance, abrasion resistance, and hydrolysis resistance.

  • Injection Molding Machined Parts: The Backbone of Modern Industry

    Injection molding, a manufacturing process that involves injecting molten plastic or metal into a mold to create parts, has become the backbone of modern industry. From the smallest components in electronics to the largest parts in automobiles, injection molding machined parts are ubiquitous in our daily lives.

  • Temperature control for injection molding

    Now the use of injection molded parts products is very much, the use of injection molded parts products when the quality requirements are very high, because inferior injection molded parts on the use of the impact is relatively large, so in the choice of need to pay attention. The quality of injection molded parts depends largely on the processing technology, and each step should be strictly controlled during processing, but bubbles will appear in the processing of injection molded parts, which is not up to standard, so let's take a look at the solution to bubbles in injection molded parts processing.

  • What is the difference between anti-static PEEK board and ordinary PEEK board?

    Anti-static PEEK board performance characteristics: under the conditions of high strength and rigidity, electrostatic conductivity, excellent dimensional stability, continuous working temperature up to 250 °C, non-flammable (UL 94 V0), filled with carbon fiber, graphite and PTFE, low Friction coefficient, wear resistance and self-lubrication, anti-static grade, resistivity 10^6-10^9 Ωcm, better prevent static charge accumulation.

Related Search

5-axis CNC machining partsCNC machining, CNC milling, 4-axis CNC machining, 5-axis CNC machining

Send Inquiry