anodizing aluminium parts Manufacturers

The peek material can be injection molded. PEEK is a high-temperature special engineering plastic and needs to be maintained at about 350 degrees. This requires the heating section of the injection molding machine barrel to continuously and stably provide a heating temperature above 350 degrees. The melting temperature of the peek material at high temperature is relatively high, and the viscosity in the molten state is relatively large, and the pressure required for injection molding is higher, and the wear of the screw is greater. In addition, peek injection molding requires heating, which is different from ordinary injection molding. It is recommended to find a manufacturer that specializes in peek injection molding to avoid certain technical risks.

Plastic products processing manufacturers in many plastic parts, pay attention to polyvinyl chloride, styrene, polyethyl acetate and acrylate and other plastics, the remaining small amount of monomer will produce an unpleasant odor, the use of monomer residual resin can remove those odors.

PFA machining is a service that technology companies use in-house technology to machine machines for customers. Customers can not only ensure the quality of materials through this processing service, but also get a full range of solutions to engineering plastics problems. In order to better serve the public, the technology company has further expanded the field of service, introduced processing equipment with stable performance and increased inventory, which not only ensures the supply of products but also improves the level of service.

General precision injection molds have two indicators, namely equipment accuracy and mold error. The former is difficult to compare due to the difference in size and product thickness, and represents the comprehensive level of injection molding machines. Generally, the weight repetition error of ordinary injection molding machines is 1%. A good machine can reach 0.8%, less than 0.5% is a precision machine, and less than 0.3% is an ultra-precision machine. So what are the main factors affecting precision injection mold products?

Duratron PAI polyamide-imide (PAI) profiles are well-established, widely used and proven in both extrusion and moulding grades. In high temperature applications, this advanced material combines excellent mechanical properties with very good dimensional stability. Duratron PAI is the highest performance, meltable plastic. It has outstanding high temperature resistance. Operates at high load pressures and sustained temperatures up to 260°C. Parts machined from Duratron profiles have higher compressive and impact strengths than most advanced engineering plastics.

Now the use of injection molded parts products is very much, the use of injection molded parts products when the quality requirements are very high, because inferior injection molded parts on the use of the impact is relatively large, so in the choice of need to pay attention. The quality of injection molded parts depends largely on the processing technology, and each step should be strictly controlled during processing, but bubbles will appear in the processing of injection molded parts, which is not up to standard, so let's take a look at the solution to bubbles in injection molded parts processing.