Automobile gasoline pump Manufacturers

Injection molding processing from plastic particles to molding injection molding products needs to go through a series of rigorous processes, and the lack of mastery of any process in the middle will lead to product quality problems, which are shared as follows.

Compared with ordinary nylon, MC nylon has much higher physical and mechanical properties than ordinary nylon.

PSU has a wide range of applications. In the field of electronics and electricity, PSU can be used to make various electrical parts such as contactors, connectors, transformer insulators, thyristor caps, insulating sleeves, coil bobbins, terminals and slip rings, and printing Circuit boards, bushings, covers, TV system parts, capacitor films, brush holders[1], alkaline battery boxes, etc.; in the automotive and aerospace fields, PSU can be used to make protective cover components, electric gears, battery covers, detonators, Electronic ignition device components, lighting components, aircraft interior parts and aircraft exterior parts, outer protective covers of aerospace vehicles, etc. It can also be used for PSU to make luminaire baffles, electric transmissions, sensors, etc. The demand for polysulfone polymers used to make cabin parts in the world market continues to grow.

PPS valve is an ideal alternative to PEEK as valve structural material. The cost is about 1/2 of that of PEEK. PPS has excellent corrosion resistance, high mechanical properties, and high dimensional stability. The best material for medium and high-end working conditions, with very good machinability.

Confirm the cooling water path, the depth of screwing the screw into the plate is 1.5-1.8 times the diameter of the screw. If the screwing is insufficient, it is easy to slip the teeth, and there is a danger of mold falling. Check whether the staff, materials, tools, documents, equipment auxiliary equipment, etc. required for production are in good condition.

Compared with PTFE, the advantages of PEEK material are high strength, good wear resistance, high mechanical strength at high temperature, dimensional stability, good creep resistance, and injection molding.