CNC Machined hardware parts Manufacturers

Confirm the cooling water path, the depth of screwing the screw into the plate is 1.5-1.8 times the diameter of the screw. If the screwing is insufficient, it is easy to slip the teeth, and there is a danger of mold falling. Check whether the staff, materials, tools, documents, equipment auxiliary equipment, etc. required for production are in good condition.

There are many reasons for the workpiece overcut in cnc processing. If the workpiece is overcut, it will be repaired after welding, and the workpiece will be discarded directly. Especially when the large mold is processed, it is the most troublesome thing to encounter the workpiece overcut. How to deal with it, I will share with you my work experience below.

The process conditions of injection molding have been explained on the official website of Huanke Precision. Today, Huanke Precision will continue to talk about another important factor affecting the quality of injection molding parts: action time, that is, the molding cycle of plastic products.

Duratron D7000 PI (color: natural/maroon) has a temperature resistance between Duratron PAI and Duratron PBI. It is of particular value at temperatures beyond what the Duratron PAI can handle and when the Duratron PBI is too expensive. Several Duratron PI products are available for structural and wear-prone applications, and are available in a wide range of sizes - especially for thicker plates, larger decks and thick-walled pipes. In addition to being more resistant to high temperatures, Duratron D7000 PI has very good mechanical properties.

In the machining process of the CNC machining center, it is very important to avoid the collision of the CNC machining center when programming and operating the machining. Because the price of CNC machining center is very expensive, ranging from hundreds of thousands of yuan to millions of yuan, what are its advantages?

between the two pulse discharge, there should be enough pause time, discharge electrical corrosion products, so that the electrode medium fully deionization, restore dielectric properties, to ensure that each pulse discharge is not at the same point, to avoid local burns, in order to make repetitive pulse discharge smoothly.