Gehr PEEK CA30 plate Manufacturers

Confirm the cooling water path, the depth of screwing the screw into the plate is 1.5-1.8 times the diameter of the screw. If the screwing is insufficient, it is easy to slip the teeth, and there is a danger of mold falling. Check whether the staff, materials, tools, documents, equipment auxiliary equipment, etc. required for production are in good condition.

Precision hardware can be cut according to production needs, and then some small accessories can be cut or CNC processed, and precision hardware must be used as a container for cutting and punching, followed by welding, then sanding, and oil injection. After the accessories are made done. It should be reminded that small parts also need to be electroplated or sprayed on the surface after grinding. There are many cases of batch processing of precision metal parts, so the production method and cycle of precision metal processing are different from the operating specifications and processes of general product processing.

Everyone is familiar with plastics, but the understanding of rubber is still very vague. Sometimes rubber is regarded as plastic. Do you want to know the difference between plastic and rubber? Then take a look at the following introduction.

Injection molding is a widely used manufacturing process for producing a variety of plastic parts and products. The process relies on a machine known as an injection molding machine, which consists of several key components that work together to create the desired plastic parts. In this article, we'll explore the main components of an injection molding machine and how they contribute to the overall process.

PEEK has the characteristics of high temperature resistance, high wear resistance, high tensile strength, and good flame retardancy. It also has the heat resistance and chemical stability of thermosetting plastics and the molding processability of thermoplastics. The long-term use temperature of PEEK is about 260-280°C, the short-term use temperature can reach 330°C, and the high pressure resistance can reach 30MPa. It is a good material for high-temperature sealing rings. PEEK products are suitable for use in a variety of harsh working conditions.

The lightweight performance of PEEK materials and the comprehensive performance potential behind them are exciting. PEEK offers some representative products for the aviation industry, such as the PEEK polymer injection molded parts used to replace the expensive production of aluminum brackets.