glass filled peek tube, Manufacturers

The prerequisite for the success of plastic molds is mainly reasonable plastic mold design. The design of plastic molds is relatively important, and the same structure can be produced in multiple ways.

In the process of injection molding, if it is found that the geometric shape of the plastic product is unstable and the error of the external dimension is relatively large, it may be that the compression ratio of the inner cavity of the mold is relatively small; the length of the molding part of the mold die is relatively small; the sizing sleeve is deformed or the mold is The specific temperature is not uniform.

We need to look at things like a workholding fixture to make sure it's sturdy and that it doesn't promote harmonic issues or vibration during machining. We need to make sure we don't use unnecessarily long tools that can easily turn or increase the chance of chattering. In high-speed processes, we need to ensure that we use a mass-balanced tool that is rated according to the programmed RPM used. But what if all the things mentioned above are fine?

plastic gears and electrical shells are products that are widely used in our lives, and they also carry forward the benefits of being very stressful in our lives. For example, many plastic products used in our lives are required for plastic processing in Changzhou, and injection molded parts widely used in the machinery industry will also need to be processed for injection molded parts. Friends may encounter deformation when processing injection molded parts, so this time I will briefly talk to my friends about this question.

PEEK material is a high-temperature, high-performance thermoplastic special engineering plastic with good mechanical properties, chemical resistance, abrasion resistance, and hydrolysis resistance.

Precision hardware can be cut according to production needs, and then some small accessories can be cut or CNC processed, and precision hardware must be used as a container for cutting and punching, followed by welding, then sanding, and oil injection. After the accessories are made done. It should be reminded that small parts also need to be electroplated or sprayed on the surface after grinding. There are many cases of batch processing of precision metal parts, so the production method and cycle of precision metal processing are different from the operating specifications and processes of general product processing.