injection molding delrin parts Manufacturers

Injection molding material does not meet the application requirements will also lead to the appearance of poor luster.

Medical instrument casings are generally classified according to their uses and functions, and the common ones include the following three categories

The plastic box injection mold is composed of two sides, fixed mold and fixed mold, and the rear mold is placed on the moving template of the injection molding machine, and the fixed mold is placed on the fixed template of the injection molding machine. When injecting and molding, the back mold and the fixed mold are closed to form a pouring system and cavity, and the back mold and the fixed mold are separated when the mold is released, which is convenient for removing the plastic product.

When analyzing part design, mold making, and efficient production of molded plastic products, the stages of the injection molding process should be carefully considered. There are not many factors and configurations involved here, but the basic process is the same. Let's start with the basics.

Nylon products have many advantages, such as good performance in impact resistance, wear resistance and fatigue resistance. Therefore, nylon gears are widely recognized and welcomed by consumers in the market. It should be noted that nylon products have been used for nearly 30 years in helical gears, worm gears, spur gears and helical gears.

During the continuous operation of the mold, it is easy to cause problems such as wear of parts, deterioration of lubricants, water leakage, and crushing of plastic materials during the movement process, so mold maintenance is required.