injection mould acetal parts Manufacturers

Corresponding heat treatment process for machined parts will help to increase the hardness, wear resistance and strength of machined parts, and greatly enhance the precision and service life of machined parts.

The brightness of the matrix resin itself has a great influence on the brightness of PP products. In order to improve the brightness of PP injection molding processing, a small amount of polyacrylate resin with excellent compatibility can be added.

The cooling time of the part usually refers to the period of time from when the plastic melt fills the cavity of the injection mold until the part can be opened and taken out. The time standard for taking out the part by opening the mold is often based on the part that has been fully cured, has a certain strength and rigidity, and will not be deformed and cracked when the mold is opened and ejected.

Now the use of injection molded parts products is very much, the use of injection molded parts products when the quality requirements are very high, because inferior injection molded parts on the use of the impact is relatively large, so in the choice of need to pay attention. The quality of injection molded parts depends largely on the processing technology, and each step should be strictly controlled during processing, but bubbles will appear in the processing of injection molded parts, which is not up to standard, so let's take a look at the solution to bubbles in injection molded parts processing.

PEI machined parts are more cost-effective, only 1/3 of PEEK in terms of material, which can effectively reduce costs. The tooling and fixtures machined by PEI are mainly used in the 3C industry, such as mobile phone fixtures, inspection tools, tooling, etc.

The plastic box injection mold is composed of two sides, fixed mold and fixed mold, and the rear mold is placed on the moving template of the injection molding machine, and the fixed mold is placed on the fixed template of the injection molding machine. When injecting and molding, the back mold and the fixed mold are closed to form a pouring system and cavity, and the back mold and the fixed mold are separated when the mold is released, which is convenient for removing the plastic product.