Products
Home > Products > Molds for plastic parts

Molds for plastic parts Manufacturers

Guangzhou Ideal Plastic Tech is one of China peek machined parts, aluminum machined parts, plastic molded parts manufacturers and suppliers, specialized in CNC Lath&mill, mold making and plastic injecting molding, was established in China in 2011.Our factory located in Guangzhou, with more than 1000 square meters plant. More than 10 years CNC machining and injection molding experience, Non-standard parts processing and custom made.

Related Products

Hot Products

  • Molded Polypropylene PP fittings

    Molded Polypropylene PP fittings

    We supply CNC machined and milled parts and also injection molded parts, such as PP,PC,POM,PVDF,PEEK,PEI,PAI,PVC,CPVC,PFA,Nylon,ABS...etc.
  • PEEK molded parts

    PEEK molded parts

    We supply CNC machined and injection molded PEEK products, such as seal rings, valve plate, valve seats, bushing, sleeve, screw, bolt, nut, washer, gasket..etc.
  • PEEK Valve Disc

    PEEK Valve Disc

    PEEK valve disc is a super heat-resistant aromatic crystalline thermoplastics Polyetheretherketone are in the harsh environment in accordance with the requirements of the development of the use of high-performance, and practical applications of a wide range of plastic Softening point of 334 C, the glass transition temperature of 143 C.
  • Vespel sp-1 parts

    Vespel sp-1 parts

    Vespel sp-1 parts/Vespel sp-1 CNC parts is a super-performance engineering plastics(300℃ long-term working temperature), and has an excellent mechanical and thermal dimensional stability dielectric properties, wear-resistant, weather resistance, permeability wave, and self-lubricating properties, referred to as"the Problem solvers.
  • Victrex black PEEK sheet and rod

    Victrex black PEEK sheet and rod

    Victrex black PEEK sheet and rod is a super heat-resistant aromatic crystalline thermoplastics. Victrex black PEEK sheet and rod can be used at very high tmperatures(about+260°C) and Victrex black PEEK sheet and rod shows an extraordinary mechanical strength,thoughness,hardness,flexural strength, PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260°C and a very good resistance to all kinds of radiation(even ultraviolet rays only lead to a slight yellow discolouration of its self-extinguishing properties according to UL 94.Welcome to buy Victrex black PEEK sheet and rod from us.
  • Torlon PAI 4203 parts /Torlon clamps

    Torlon PAI 4203 parts /Torlon clamps

    Torlon PAI plastic is a modified polyimide and is a kind high temperature resistant engineering plastic.Torlon bearing cage,Torlon PAI 4203 parts /Torlon clamps is used as petrochemical industry with good performance.
  • Related Blog
  • Reviews

  • Duratron® PI

    Duratron D7000 PI (color: natural/maroon) has a temperature resistance between Duratron PAI and Duratron PBI. It is of particular value at temperatures beyond what the Duratron PAI can handle and when the Duratron PBI is too expensive. Several Duratron PI products are available for structural and wear-prone applications, and are available in a wide range of sizes - especially for thicker plates, larger decks and thick-walled pipes. In addition to being more resistant to high temperatures, Duratron D7000 PI has very good mechanical properties.

  • Analysis of the advantages of nylon gears that can replace metal gears

    Nylon products have many advantages, such as good performance in impact resistance, wear resistance and fatigue resistance. Therefore, nylon gears are widely recognized and welcomed by consumers in the market. It should be noted that nylon products have been used for nearly 30 years in helical gears, worm gears, spur gears and helical gears.

  • Can peek material be injection molded?

    The peek material can be injection molded. PEEK is a high-temperature special engineering plastic and needs to be maintained at about 350 degrees. This requires the heating section of the injection molding machine barrel to continuously and stably provide a heating temperature above 350 degrees. The melting temperature of the peek material at high temperature is relatively high, and the viscosity in the molten state is relatively large, and the pressure required for injection molding is higher, and the wear of the screw is greater. In addition, peek injection molding requires heating, which is different from ordinary injection molding. It is recommended to find a manufacturer that specializes in peek injection molding to avoid certain technical risks.

  • EDM mirror spark machining must have five conditions

    between the two pulse discharge, there should be enough pause time, discharge electrical corrosion products, so that the electrode medium fully deionization, restore dielectric properties, to ensure that each pulse discharge is not at the same point, to avoid local burns, in order to make repetitive pulse discharge smoothly.

  • What are the advantages of CNC machining technology? What are the skills of CNC machining programming?

    In the machining process of the CNC machining center, it is very important to avoid the collision of the CNC machining center when programming and operating the machining. Because the price of CNC machining center is very expensive, ranging from hundreds of thousands of yuan to millions of yuan, what are its advantages?

  • What are the characteristics of bevel gears?

    Bevel gears are conical gears that are conical, used for transmission of two vertical shafts, but are also suitable for transmission of two shafts at other angles. Normally, a horizontal drive device is used to drive a vertical pump. Bevel gears have a wide range of uses, especially when the two shafts intersect, the distance between the two shafts is very close, the transmission power is large, and the rotation ratio is fixed, the bevel gear is most suitable.

Send Inquiry