Products
Home > Products > NYLATRON GSM parts

NYLATRON GSM parts Manufacturers

Guangzhou Ideal Plastic Tech is one of China peek machined parts, aluminum machined parts, plastic molded parts manufacturers and suppliers, specialized in CNC Lath&mill, mold making and plastic injecting molding, was established in China in 2011.Our factory located in Guangzhou, with more than 1000 square meters plant. More than 10 years CNC machining and injection molding experience, Non-standard parts processing and custom made.

Related Products

Hot Products

  • CNC turning and milled Al-Alloy 6061-T6 aluminum parts

    CNC turning and milled Al-Alloy 6061-T6 aluminum parts

    We are plastic factory that focus on manufacturing CNC turning and milled Al-Alloy 6061-T6 aluminum parts/stainless steel 201,301,303,304,316,316L,Metal/ copper/Brass and Plastic parts.
  • Nylon Washer

    Nylon Washer

    Nylon washer, commonly known as nylon is recognized as the most widely used and known engineering plastic in the current market.
  • Torlon PAI plates/Torlon PAI sheets

    Torlon PAI plates/Torlon PAI sheets

    PAI,polyamide-imide is a modified polyimide, it is a heat resistant amorphous engineering thermoplastics, offers exceptional toughness, stiffness and strength and is both impact resistant and extremely durable.Welcome to buy Torlon PAI Sheet and Rod from us. We supply Torlon PAI rods and sheets including Torlon PAI 4203 sheet and rod, Torlon PAI 5530 sheet and rod, Torlon PAI 4301 sheet and rod, and also other materials such as PEEK, PEI, PPS, PFA, PVDF, PTFE, CPVC..etc.
  • Custom CNC Machining Turning Milling Anodized Aluminum Mechanical Parts

    Custom CNC Machining Turning Milling Anodized Aluminum Mechanical Parts

    we are specialized manufacturers from China, We make 3/4/5 Axis CNC machined /milled iron/metal/aluminum/copper/stainless steel 303/304/314/316 parts.
  • PTFE Teflon Balls

    PTFE Teflon Balls

    PTFE Teflon balls is also named Teflon, PTFE Teflon ballswas divided into PTFE,PFA,FEP,PCTFE,ETFE, it has an extremely long service life, even at extreme temperatures, in ultraviolet (UV) light, and when exposed to oils, oxidizing agents and solvents. PTFE also is extremely corrosion resistant, especially to acids, and harsh inorganic and organic chemicals. Additionally, the original properties PTFE remain the same even after extended time periods in water. Furthermore, PTFE is resistant to atmospheric aging in the form of discoloration, oxidation, and as previously noted, is not affected by ultraviolet light.
  • Ensinger PEEK sheet and Ensinger PEEK plate

    Ensinger PEEK sheet and Ensinger PEEK plate

    Ensinger PEEK sheet and Ensinger PEEK plate is a super heat-resistant aromatic crystalline thermoplastics. Ensinger PEEK sheet and Ensinger PEEK plate can be used at very high tmperatures(about+260°C) and Ensinger PEEK sheet and Ensinger PEEK plate shows an extraordinary mechanical strength,thoughness,hardness,flexural strength, PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260°C and a very good resistance to all kinds of radiation(even ultraviolet rays only lead to a slight yellow discolouration of its self-extinguishing properties according to UL 94.Welcome to buy Ensinger PEEK sheet and Ensinger PEEK plate from us.
  • Related Blog
  • Reviews

  • Temperature control for injection molding

    Now the use of injection molded parts products is very much, the use of injection molded parts products when the quality requirements are very high, because inferior injection molded parts on the use of the impact is relatively large, so in the choice of need to pay attention. The quality of injection molded parts depends largely on the processing technology, and each step should be strictly controlled during processing, but bubbles will appear in the processing of injection molded parts, which is not up to standard, so let's take a look at the solution to bubbles in injection molded parts processing.

  • What are the advantages and disadvantages of PEEK and PTFE?

    Compared with PTFE, the advantages of PEEK material are high strength, good wear resistance, high mechanical strength at high temperature, dimensional stability, good creep resistance, and injection molding.

  • What are the precautions for producing machined parts

    For many large-scale equipment, machined parts are indispensable during production and assembly, and the quality of machined parts also determines whether the performance of the entire equipment can be fully released. At the same time, good machined parts can also extend the equipment. service life. There are also many factories on the market that produce machined parts. When producing machined parts, you should pay attention to the following matters in order to make better products.

  • Reasons for heat treatment in machining

    Corresponding heat treatment process for machined parts will help to increase the hardness, wear resistance and strength of machined parts, and greatly enhance the precision and service life of machined parts.

  • What is polyimide? What are the main varieties?

    Polyimide, also known as PI, is an aromatic heterocyclic polymer with acyl imine groups in its main chain. Its general formula is as follows: Ar and Ar in the formula represent aryl groups.

  • Medical injection mold forming structure

    Medical injection mold pouring system It is the channel that leads the molten plastic from the injection machine nozzle to the closed mold cavity. It is generally composed of a main flow channel, a runner, a gate and a cold slug well.

Send Inquiry