Products
Home > Products > PEEK Bushings

PEEK Bushings Manufacturers

Guangzhou Ideal Plastic Tech is one of China peek machined parts, aluminum machined parts, plastic molded parts manufacturers and suppliers, specialized in CNC Lath&mill, mold making and plastic injecting molding, was established in China in 2011.Our factory located in Guangzhou, with more than 1000 square meters plant. More than 10 years CNC machining and injection molding experience, Non-standard parts processing and custom made.

Related Products

Hot Products

  • Delrin 100p nc010 machined parts

    Delrin 100p nc010 machined parts

    We supply POM/Acetal/Delrin parts, including various custom made products, such as bearing, wheel, pulley, roller, sleeve, bushing, washer, bolt, screw, rings, spacer, gear...etc.
  • Nylon Sleeve

    Nylon Sleeve

    Nylon sleeve, commonly known as nylon is recognized as the most widely used and known engineering plastic in the current market.
  • UHMWPE Sliding Block

    UHMWPE Sliding Block

    UHMWPE sliding block is a linear structure of thermoplastic engineering plastics with excellent comprehensive properties,it has super abrasion resistance, self-lubricating, relatively high strength, stable chemical properties, and strong anti-aging performance.
  • PEEK nozzle tips

    PEEK nozzle tips

  • PEEK GF30 Rod

    PEEK GF30 Rod

    Polyetheretherketone(PEEK) is a super heat-resistant aromatic crystalline thermoplastics . PEEK can be used at very high tmperatures(about+260°C) and it shows an extraordinary mechanical strength,thoughness,hardness,flexural strength, PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260°C and a very good resistance to all kinds of radiation(even ultraviolet rays only lead to a slight yellow discolouration of its self-extinguishing properties according to UL 94.Welcome to buy PEEK GF30 Rod from us.
  • Victrex black PEEK sheet and rod

    Victrex black PEEK sheet and rod

    Victrex black PEEK sheet and rod is a super heat-resistant aromatic crystalline thermoplastics. Victrex black PEEK sheet and rod can be used at very high tmperatures(about+260°C) and Victrex black PEEK sheet and rod shows an extraordinary mechanical strength,thoughness,hardness,flexural strength, PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260°C and a very good resistance to all kinds of radiation(even ultraviolet rays only lead to a slight yellow discolouration of its self-extinguishing properties according to UL 94.Welcome to buy Victrex black PEEK sheet and rod from us.
  • Related Blog
  • Reviews

  • What are the factors related to the accuracy of the plastic mold?

    Product design is an intense aspect of the injection molding manufacturing process. Precise design is to achieve the desired goal to a pleasant level, but it may require a lot of creativity. Product design is usually done through the application of computer aided design, and a few specific techniques to avoid the error of high prices in the product design process as symmetrical as possible wall thickness decisions, and gradually transition from one thickness to another when thickness changes are unavoidable.

  • Injuries caused by temperature rising too quickly during injection molding

    In the case of injection molding processing, it will undoubtedly be applied to injection molding machine equipment, it is a process that cannot be missing in the entire production process, and its necessity cannot be ignored. However, in the case of the application of injection molding machine for production and processing, we must pay attention to the difficulty of the temperature rise of the equipment too quickly, which is likely to lead to great shortcomings.

  • Injection Molding Machined Parts: The Backbone of Modern Industry

    Injection molding, a manufacturing process that involves injecting molten plastic or metal into a mold to create parts, has become the backbone of modern industry. From the smallest components in electronics to the largest parts in automobiles, injection molding machined parts are ubiquitous in our daily lives.

  • Characteristics and applications of PPSU resin

    PPSU is a slightly amber linear polymer. In addition to strong polar solvents, concentrated nitric acid and sulfuric acid, it is stable to general acids, alkalis, salts, alcohols, aliphatic hydrocarbons, etc. Partially soluble in ester ketones' aromatic hydrocarbons, soluble in halocarbons' DM. Good rigidity and toughness, temperature resistance, heat oxidation resistance, excellent creep resistance, corrosion resistance of inorganic acids, alkalis and salt solutions, ion radiation resistance, non-toxic, good insulation and self-extinguishing properties, easy to form and process.

  • What are the factors that cause the color difference in plastic mold processing

    Plastic mold processing is widely used in the plastic product industry and has a history of development for many years. However, there are still some plastic mold processing manufacturers that have product color difference problems when processing molds, resulting in unqualified products.

  • Plastic Mould Structure

    Plastic mold structure: It mainly includes a female mold with a variable cavity composed of a female mold combined substrate, a female mold component, and a female mold combined card plate. The convex mold combines the substrate, the male mold component, the male mold composite card, and the mold A punch with a variable core composed of a cavity cut-off component and a side-cut combined plate.

Send Inquiry