PEEK HPV pulley Manufacturers

The size of injection molding should not only meet the requirements of use and installation, but also consider the processing and manufacturing of the mold, the performance of the equipment and the flow of raw materials. Strictly control the factors that affect the accuracy of injection molded parts, including the manufacturing accuracy of the mold, plastic components and process conditions. The surface roughness of injection molding is determined by the roughness of the mold surface, so the surface roughness of the mold is one level lower than that of the product, and the requirements are met by grinding and polishing. The injection molded parts will produce cooling shrinkage in the mold cavity, which makes it difficult to take out the injection molded parts. Therefore, in order to facilitate demolding, the design should also consider that the inner and outer surfaces parallel to the demolding direction have sufficient demoulding slopes.

If the temperature is too high, the low molecular weight substances in the nucleating agent will be dissected and volatilized, which reduces the active ingredients in the nucleating agent, reduces the improvement effect of brightness, and the higher temperature will destroy some crystal nuclei of PP Huaxia, reduce the middle of heterogeneous nucleation, so that the modification effect is low; If the temperature is too low, the evacuation of the nucleating agent is not good, and the brightness effect is poor. Therefore, selecting a suitable molding temperature is particularly difficult to improve clarity.

Our company purchased one set of advanced CNC lathe machine

The PEEK filament is extruded with imported extrusion equipment, and the raw material of the product is imported pure resin from Vigers PEEK450G. PEEK filaments have a normal working temperature of 260 degrees and have corrosion resistance. They can be used in solvents for a long time. Because PEEK filaments are resistant to hydrolysis, they can be cleaned and disinfected in high-temperature steam. PEEK filament is an environmentally friendly material, in line with the US FDA food sanitation requirements, and itself is flame-retardant, and has a wide range of applications.

there are more and more plastic products processing around us, plastic products processing has many advantages, such as small quality, exquisite appearance, not easy to be rotted, good impact resistance, etc., so plastic products are now very many fields and industries beloved, but also in our daily life has become a commodity that can often be seen, if you look around, there is no doubt that plastic products will appear in everyone's field of vision, it can be said that plastic has long become a raw material that is inevitable in everyone's daily life. However, many people do not know that the production of plastic products is actually asset-risky.