Products
Home > Products > PEEK ring

PEEK ring Manufacturers

Guangzhou Ideal Plastic Tech is one of China peek machined parts, aluminum machined parts, plastic molded parts manufacturers and suppliers, specialized in CNC Lath&mill, mold making and plastic injecting molding, was established in China in 2011.Our factory located in Guangzhou, with more than 1000 square meters plant. More than 10 years CNC machining and injection molding experience, Non-standard parts processing and custom made.

Related Products

Hot Products

  • Vespel slider guide

    Vespel slider guide

    Vespel SP-1 slider guide/Vespel slider guide is a super-performance engineering plastics(300℃ long-term working temperature), and has an excellent mechanical and thermal dimensional stability dielectric properties, wear-resistant, weather resistance, permeability wave, and self-lubricating properties, referred to as"the Problem solvers.
  • Custom PEEK polyetheretherketone rings

    Custom PEEK polyetheretherketone rings

    Custom PEEK polyetheretherketone rings is a super heat-resistant aromatic crystalline thermoplastics Custom PEEK polyetheretherketone rings are in the harsh environment in accordance with the requirements of the development of the use of high-performance, and practical applications of a wide range of plastic Softening point of 334 C, the glass transition temperature of 143 C.
  • PTFE Teflon Split Ring

    PTFE Teflon Split Ring

    PTFE Teflon split ring is also named Teflon, PTFE Teflon split ring was divided into PTFE,PFA,FEP,PCTFE,ETFE, it has an extremely long service life, even at extreme temperatures, in ultraviolet (UV) light, and when exposed to oils, oxidizing agents and solvents. PTFE also is extremely corrosion resistant, especially to acids, and harsh inorganic and organic chemicals. Additionally, the original properties PTFE remain the same even after extended time periods in water. Furthermore, PTFE is resistant to atmospheric aging in the form of discoloration, oxidation, and as previously noted, is not affected by ultraviolet light.
  • Ultem 2300 natural amber sheet

    Ultem 2300 natural amber sheet

    We supply Ultem PEI rods and sheets including Ultem 1000 natural sheet and rod, Ultem 2200 sheet and rod, Ultem 2300 sheet and rod, and also other materials such as PEEK, PAI, PPS, PFA, PVDF, PTFE, CPVC..etc.
  • Dupont 951HP PFA rod

    Dupont 951HP PFA rod

    Our factory supply various Fluoroplastics, such as PFA rod/sheet/tube with many sizes. as well as PTFE, PVDF, PCTFE, FEP.
  • PEEK gears rack kit

    PEEK gears rack kit

  • Related Blog
  • Reviews

  • Duratron® PBI PBI（Celazole）

    Duratron® PBI PBI (Celazole) Polybenzimidazole PBI Sheet, PBI Rod, Celazole Sheet, Celazole Rod, Duratron Sheet, Duratron Rod Duratron CU60 PBI is the highest performance engineering thermoplastic currently available. It has the highest heat resistance and mechanical properties of all unfilled plastics at temperatures above 205°C.

  • What are the main points of plastic mold design?

    The prerequisite for the success of plastic molds is mainly reasonable plastic mold design. The design of plastic molds is relatively important, and the same structure can be produced in multiple ways.

  • What are the factors related to the accuracy of the plastic mold?

    Product design is an intense aspect of the injection molding manufacturing process. Precise design is to achieve the desired goal to a pleasant level, but it may require a lot of creativity. Product design is usually done through the application of computer aided design, and a few specific techniques to avoid the error of high prices in the product design process as symmetrical as possible wall thickness decisions, and gradually transition from one thickness to another when thickness changes are unavoidable.

  • Why should precision injection molds be tried out?

    The plastic box injection mold is composed of two sides, fixed mold and fixed mold, and the rear mold is placed on the moving template of the injection molding machine, and the fixed mold is placed on the fixed template of the injection molding machine. When injecting and molding, the back mold and the fixed mold are closed to form a pouring system and cavity, and the back mold and the fixed mold are separated when the mold is released, which is convenient for removing the plastic product.

  • Produced Plastic Reagent Tube

    Our company produced plastic reagent tube, which is used on collecting the blood and saliva sample to check the virus.

  • What to pay attention to when using injection molds

    the plastic processing industry is quite vigorous, with the continuous progress of material technology, the injection molding process is now more and more mature, many manufacturers have been able to master this technology to produce and process plastics. In the middle of the injection molding process, the demand is often applied to a few molds, and the quality of the mold simply affects the quality of plastic products to some extent, so for the operator, the application of the tube mold is the basic requirement. What events do you need to pay attention to in the middle of the application process of injection molds?

Related Search

Big peek ringsKetron PEEK ringsPEEK ringsVICTREX PEEK rings

Send Inquiry