Plastic Luer Manufacturers

Plastic mold is an abbreviation for a combined mold for extrusion, injection, compression, blow molding and low foam molding. The coordinated changes of the mold convex, concave mold and auxiliary molding system can process a series of plastic parts with different sizes and shapes.

As we all know, in CNC machining, there are many types of CNC lathe tools with different functions, and the effects of different tools are also different. Therefore, the choice of tools is very important. We need to choose the tools correctly according to different processing conditions. So how to choose metal CNC machining parts?

In the process of injection molding, if it is found that the geometric shape of the plastic product is unstable and the error of the external dimension is relatively large, it may be that the compression ratio of the inner cavity of the mold is relatively small; the length of the molding part of the mold die is relatively small; the sizing sleeve is deformed or the mold is The specific temperature is not uniform.

The peek material can be injection molded. PEEK is a high-temperature special engineering plastic and needs to be maintained at about 350 degrees. This requires the heating section of the injection molding machine barrel to continuously and stably provide a heating temperature above 350 degrees. The melting temperature of the peek material at high temperature is relatively high, and the viscosity in the molten state is relatively large, and the pressure required for injection molding is higher, and the wear of the screw is greater. In addition, peek injection molding requires heating, which is different from ordinary injection molding. It is recommended to find a manufacturer that specializes in peek injection molding to avoid certain technical risks.

The traditional five-axis CNC machining process may cause waste parts due to temperature or other processing techniques. Unlike ordinary metal processing, some rubber or plastic molds cannot be recycled after being scrapped. For enterprises The five-axis processing of rubber molds may greatly affect the net profit, but the choice of five-axis processing of rubber molds shows many advantages.