PPSU plug Manufacturers

From food storage to toiletries, from bags to water bottles, we rely entirely on plastic processing. There is no doubt that plastic manufacturers are a good choice in terms of availability and price. But before you continue to use plastic containers occasionally, stop and think about how this affects your health. Even if you are particularly careful about what you eat, using only plastic containers can put your health at risk. In the long run, the compounds in these seemingly harmless plastic containers can also affect your health.

The size of injection molding should not only meet the requirements of use and installation, but also consider the processing and manufacturing of the mold, the performance of the equipment and the flow of raw materials. Strictly control the factors that affect the accuracy of injection molded parts, including the manufacturing accuracy of the mold, plastic components and process conditions. The surface roughness of injection molding is determined by the roughness of the mold surface, so the surface roughness of the mold is one level lower than that of the product, and the requirements are met by grinding and polishing. The injection molded parts will produce cooling shrinkage in the mold cavity, which makes it difficult to take out the injection molded parts. Therefore, in order to facilitate demolding, the design should also consider that the inner and outer surfaces parallel to the demolding direction have sufficient demoulding slopes.

the turn-milling compound can cover the processing of the five-axis machining center, but the five-axis can not do the turn-milling compound processing. Turning and milling compound is in fact the extension of lathe function, mainly to the lathe function and then add the power head, increase the milling and drilling function of the milling machine, thus reducing the product processing technology to improve the efficiency.

In the machining process of the CNC machining center, it is very important to avoid the collision of the CNC machining center when programming and operating the machining. Because the price of CNC machining center is very expensive, ranging from hundreds of thousands of yuan to millions of yuan, what are its advantages?

Compared with PTFE, the advantages of PEEK material are high strength, good wear resistance, high mechanical strength at high temperature, dimensional stability, good creep resistance, and injection molding.

​PPS GF40 (Polyphenylene-sulphide Glass Fiber reinforced) molded parts are widely used in various industries, including automotive, aerospace, electronics, and industrial applications, due to their excellent characteristics.