Torlon PAI Manufacturers

​PPS GF40 (Polyphenylene-sulphide Glass Fiber reinforced) molded parts are widely used in various industries, including automotive, aerospace, electronics, and industrial applications, due to their excellent characteristics.

The peek material can be injection molded. PEEK is a high-temperature special engineering plastic and needs to be maintained at about 350 degrees. This requires the heating section of the injection molding machine barrel to continuously and stably provide a heating temperature above 350 degrees. The melting temperature of the peek material at high temperature is relatively high, and the viscosity in the molten state is relatively large, and the pressure required for injection molding is higher, and the wear of the screw is greater. In addition, peek injection molding requires heating, which is different from ordinary injection molding. It is recommended to find a manufacturer that specializes in peek injection molding to avoid certain technical risks.

Our factory address moved from Tianhe, guangzhou to xintang, Guangzhou east, zengceng city.

The process conditions of injection molding have been explained on the official website of Huanke Precision. Today, Huanke Precision will continue to talk about another important factor affecting the quality of injection molding parts: action time, that is, the molding cycle of plastic products.

the plastic processing industry is quite vigorous, with the continuous progress of material technology, the injection molding process is now more and more mature, many manufacturers have been able to master this technology to produce and process plastics. In the middle of the injection molding process, the demand is often applied to a few molds, and the quality of the mold simply affects the quality of plastic products to some extent, so for the operator, the application of the tube mold is the basic requirement. What events do you need to pay attention to in the middle of the application process of injection molds?

PPS valve is an ideal alternative to PEEK as valve structural material. The cost is about 1/2 of that of PEEK. PPS has excellent corrosion resistance, high mechanical properties, and high dimensional stability. The best material for medium and high-end working conditions, with very good machinability.