Products
Home > Products > Ultem insulators

Ultem insulators Manufacturers

Guangzhou Ideal Plastic Tech is one of China peek machined parts, aluminum machined parts, plastic molded parts manufacturers and suppliers, specialized in CNC Lath&mill, mold making and plastic injecting molding, was established in China in 2011.Our factory located in Guangzhou, with more than 1000 square meters plant. More than 10 years CNC machining and injection molding experience, Non-standard parts processing and custom made.

Related Products

Hot Products

  • Duratron PAI 4203 balls (Polyamide-imide) PAI 4203L balls

    Duratron PAI 4203 balls (Polyamide-imide) PAI 4203L balls

    We supply high precision Torlon Duratron PAI balls with different sizes of 4mm, 5mm, 6mm, 8mm, 1/8",5/32'', 3/16'', 7/32'', 1/4'', 5/16'', 3/8'', 7/16'',1/2'',0.7'',1'',   1 1/8'',1 1/2'', 2'' and other sizes
  • Injection molded ABS fittings

    Injection molded ABS fittings

    We are focus on designing and manufacturing Injection molded ABS parts, molded PEEK parts, Molded PEI parts, Molded PPS parts, Molded PAI parts, Molded PVDF parts, Molded PP parts, Molded PC parts, Mold PPSU parts, Molded POM parts...etc.
  • PEEK plugs 1/16 inch lab equipment used HPLC peek fittings

    PEEK plugs 1/16 inch lab equipment used HPLC peek fittings

    We manufacture PEEK HPLC fittings, such as PEEK screw, PEEK plug, PEEK ferrule, PEEK loops, PEEK straight couplings, PEEK tees, PEEK multi couplings, PEEK capillary tube, 1/16'' PEEK screw, 1/8'' PEEK screw, Luer fittings...etc.
  • PTFE Teflon Split Ring

    PTFE Teflon Split Ring

    PTFE Teflon split ring is also named Teflon, PTFE Teflon split ring was divided into PTFE,PFA,FEP,PCTFE,ETFE, it has an extremely long service life, even at extreme temperatures, in ultraviolet (UV) light, and when exposed to oils, oxidizing agents and solvents. PTFE also is extremely corrosion resistant, especially to acids, and harsh inorganic and organic chemicals. Additionally, the original properties PTFE remain the same even after extended time periods in water. Furthermore, PTFE is resistant to atmospheric aging in the form of discoloration, oxidation, and as previously noted, is not affected by ultraviolet light.
  • PEEK back up rings

    PEEK back up rings

  • PEEK Seal Ring

    PEEK Seal Ring

    PEEK seal ring is a super heat-resistant aromatic crystalline thermoplastics Polyetheretherketone are in the harsh environment in accordance with the requirements of the development of the use of high-performance, and practical applications of a wide range of plastic Softening point of 334 C, the glass transition temperature of 143 C.
  • Related Blog
  • Reviews

  • Plastic product processing whitening plan

    Product design: Plastic product processing holds rounding and increases the demolding slope. Mold: 1. Mold surface polishing. 2. Pull the white status growth thimble. 3. Confirm that the parting surface has no inverted buckles and air spurs, and repair it with oil stone. Injection molding process: 1. Under the premise of thorough filling of the clad product, accept the lowest possible injection pressure. 2. Confirm that there is no problem with the size and appearance of the product, reduce the holding pressure, holding time or cancel the holding pressure. 3. Adjust mold temperature and cooling time. When we are in the injection molding of plastic finished products, we usually encounter the idea of product whitening, we can first analyze the whitening from the methods of man, machine, material, method and ring, and classify and summarize all the components that affect the product; Re-examine the process opened up by the product.

  • What are the advantages and disadvantages of PEEK and PTFE?

    Compared with PTFE, the advantages of PEEK material are high strength, good wear resistance, high mechanical strength at high temperature, dimensional stability, good creep resistance, and injection molding.

  • Injuries caused by temperature rising too quickly during injection molding

    In the case of injection molding processing, it will undoubtedly be applied to injection molding machine equipment, it is a process that cannot be missing in the entire production process, and its necessity cannot be ignored. However, in the case of the application of injection molding machine for production and processing, we must pay attention to the difficulty of the temperature rise of the equipment too quickly, which is likely to lead to great shortcomings.

  • Analysis on the Development of Polyimide Market

  • Basic introduction of polyurethane rubber

    The code name (UR) is made by the polymerization of polyester (or polyether) and diisocyanamide lipid compounds. Its chemical structure is more complex than that of general elastic polymers. In addition to the recurring carbamate groups, the molecular chain often contains groups such as ester groups, ether groups, and aromatic groups.

  • Which industries need PEEK machining

    The stability of metal has always made it the main raw material for the production of products in many manufacturing industries, but the weight of this raw material is large, which is not conducive to improving the quality of the produced products, and PEEK machining can create high wear resistance, high temperature resistance, For products with strong elongation and good flame retardancy, which industries will use such machining?

Send Inquiry