Victrex PEEK seal rings Manufacturers

For many large-scale equipment, machined parts are indispensable during production and assembly, and the quality of machined parts also determines whether the performance of the entire equipment can be fully released. At the same time, good machined parts can also extend the equipment. service life. There are also many factories on the market that produce machined parts. When producing machined parts, you should pay attention to the following matters in order to make better products.

The lightweight performance of PEEK materials and the comprehensive performance potential behind them are exciting. PEEK offers some representative products for the aviation industry, such as the PEEK polymer injection molded parts used to replace the expensive production of aluminum brackets.

If the temperature is too high, the low molecular weight substances in the nucleating agent will be dissected and volatilized, which reduces the active ingredients in the nucleating agent, reduces the improvement effect of brightness, and the higher temperature will destroy some crystal nuclei of PP Huaxia, reduce the middle of heterogeneous nucleation, so that the modification effect is low; If the temperature is too low, the evacuation of the nucleating agent is not good, and the brightness effect is poor. Therefore, selecting a suitable molding temperature is particularly difficult to improve clarity.

between the two pulse discharge, there should be enough pause time, discharge electrical corrosion products, so that the electrode medium fully deionization, restore dielectric properties, to ensure that each pulse discharge is not at the same point, to avoid local burns, in order to make repetitive pulse discharge smoothly.

Anti-static PEEK board performance characteristics: under the conditions of high strength and rigidity, electrostatic conductivity, excellent dimensional stability, continuous working temperature up to 250 °C, non-flammable (UL 94 V0), filled with carbon fiber, graphite and PTFE, low Friction coefficient, wear resistance and self-lubrication, anti-static grade, resistivity 10^6-10^9 Ωcm, better prevent static charge accumulation.